Gilbert Arizona Shed and Pool Fence Guide

Gilbert shed and pool fence planning should start with size, utility connections, attachment to other structures, setbacks, pool barrier height, gate hardware, and opening limits.

Permit takeaway

Gilbert's code FAQ says storage buildings 200 square feet or larger require a building permit, and permits are also required if utilities such as electrical or plumbing are installed or if the shed connects to another structure.

Zoning and placement

Sheds under 200 square feet may avoid a building permit, but setback and land development standards can still apply.

Building and trade review

Gilbert pool fencing must enclose pools with walls or fencing not less than five feet and not more than six feet high, with openings small enough to block a four-inch sphere and gates that are self-closing and self-latching.

Call before applying when

Call before installing a shed with utilities, connecting a shed to the house, placing a shed near setbacks, replacing a pool barrier, or adding RV gates in a pool enclosure.

Documents to prepare

• Shed dimensions
• Utility scope
• Setback information
• Pool barrier height
• Gate and latch details

Inspection planning

• Confirm shed permit trigger
• Verify setbacks
• Apply when utilities or size require it
• Check pool barrier openings and gate hardware
• Schedule required inspections

Official sources

• Gilbert Code FAQ
• Gilbert Permits Applications and Checklists
• Gilbert Codes and Permits

This guide is a planning summary. Always verify the current requirements with the local office before starting work.